|
Return to Available Features page | Return to
Accessories Page
Overhead
Doors | Windows | Sliding Doors | Custom
Doors | Door Openers
Overhead Doors
A Typical
Example of our Commercial Doors
|
Full View Panels |
Features:
- Tongue and Groove Joint on 1 3/4" (45mm)
Tk. panel with dual fin weather-strip. Shiplap
joint on 1 1/2" (38mm) Tk. Panel
- Two Continuous Hinge Reinforcement strips on 1 3/4" (45mm)
Tk, top and bottom; permits use of full hinges. Single strip hinge reinforcement on 1 1/2" (38mm)Tk.
|
- Designed to prevent air and rain infiltration
- 20 Gauge (1.0mm) End Stiles.
- 26 Gauge (0.482mm) Steel skins, stucco embossed; 20 Gauge (1.0mm) exterior available.
- R Value:
- 1 3/4" (45mm)-16.3
1 1/2" (38mm)-14.1
- Foam Density: 2.5 lbs/cu. ft. (40Kg/m3)
- Suitable for doors up to 26' in width.
- Thermally broken chemically bonded.
- Colors: White or Brown
for 26 Gauge (0.482mm); White only for 20 Gauge (1.0mm)
|
Sealed
Thermo-Pane Windows
Solid
Hydroswing |
|
The pre-painted steel doors for
industrial and commercial use offer all the advantages of a standard garage
door, plus a higher insulation factor than products in the same category.
Back to top
|
Windows
 |
Sealed thermal glass are
inserted into an expanded PVC frame which is cast without joints and
guaranteed for 10 years against any glass sealing defect. Window frames
are offered in White, Brown. Desert Sand or Claystone. |
 |
Full vision window sections
(service-station type) are composed of glass sections, inserted into clear
anodized or white pre-painted alumimium extrusion. Several types of glass
(tempered, tinted, etc.) are available. Contact our customer service
department. |
G-5000 Features
- 26-gauge hot-galvanized steel with
woodgrain finish on both sides of the door.
- Rustproof baked-on polyester paint. Can
be repainted.
- 1 3/4 in. (44.5 mm) insulated door with
high-pressure injected polyurethane foam ensuring a high
thermal-resistance rating of R-16.04 (k= 0.357 W/m'K), and the solidity
of a composite
material.
- Solid mechanical overlap joint:
increases the weather tightness of the door and prevents delamination.
- Thermal break between the interior and
exterior faces of each section.
- Flexible tubular bottom weatherstripping
ensuring the weather tightness of the threshold
- 14-gauge reinforcement plates placed in
the interior of the door where hinges and handles are attached.
- Wood end blocks provide a thermal break
with the exterior of the door. Steel end caps are available as an
option.
- Door weight: 1.90 Ibs/ft2 (9.3 kg m2)
- 13-gauge or 14-gauge. 2 in. (51 mm)
commercial tracks (for doors of less than 140 ft2 (13 m2) or 12-gauge 3
in. (76 mm) industrial tracks. Torsion spring. Sturdy galvanized steel
suited to the door's usage. Springs from 25,000 to 200,000 cycles
(optional) are recommended for high usage doors.
|
Available sizes
Widths:
from 5' to 29' 6". in 1" increments
from 1.5 m to 9.0 m in 25 mm increments
Heights:
from 6' to 24', in 3" increments
from 1.8 to 7.3 m, in 76 mm increments
Full Vision Sections
(Service Station)
Number of units per section
96 to 122 in. (2 438 to 3 099 mm) -
3
123 to 150 in. (3 124 to 3 810 mm)-4
151 to 184 in. (3 835 to 4 674 mm) - 5
185 to 216 in. (4 699 to 5 486 mm) - 6 |
Sealed thermal glass
| Size of the windows:
|
21 in. x 13 in. (533 x 330 mm) |
| |
26 in. x 13 in. (660x330 mm) |
| |
30 in. x 13 in. (762x330 mm) |
| Width of the doors:
|
8' |
9' |
10' |
12' |
14' |
16' |
18' |
24' |
28' |
| 21 in. windows: |
3 |
4 |
4 |
5 |
6 |
7 |
8 |
11 |
15 |
| 26 in. windows: |
2 |
3 |
3 |
4 |
5 |
6 |
6 |
9 |
10 |
| 30 in. windows: |
2 |
2 |
3 |
4 |
4 |
5 |
6 |
7 |
9 |
|
|
 |
Steel coating
Hot-galvanized steel (G-60. Z-180) with five
coats of protective finish applied in the factory provides effective
rustproofing and preserves the door's beautiful appearance for years.
Given the high quality of the finish, these doors require little
maintenance and no additional protection. |
Click Here for
Additional Information about
G-5000 Windows
Back to top
| Sliding
Doors |
- Extra
heavy duty Galvalume Plus steel sliding doors and
"no sag" continuous header beam system.
- Full
width continuous bottom door track comes with vertical
support columns and wind bracing.
- Rain,
ice and snow shedder protects roller system.
"These
doors are built to last"
|
Back
to top |
|
