|

Return
to Available Features page | Return to Doors Page
Pro-T
Commercial/Industrial Trolley Operator.
The Pro-T is designed
for use on commercial/industrial sectional overhead doors with standard lift
tracks. Standard Features:
- 2 year warranty
- Heavy duty reversing contactor c/w
electrical interlock.
- Continuous duty motor with overload
protection.
- Heavy duty 5L V-belt
- 3/4" ball bearing on pulley shaft
- 1" ball bearings on drive shaft
- 24V fused control circuit
- C-2 wiring standard (Constant Pressure
Close)
Note: B-2 Wiring can be field set by moving 1 jumper wire. Safety
equipment must be installed when B-2 wiring is used.
- External radio control terminal strip.
- Three Button Control Station
- Fully adjustable rotary limit switches.
|

|
- Powder metal limit cams
- Motor removable without affecting limit
setting
- Adjustable friction clutch
- Emergency quick release disconnect for
manual operation
- #48 roller chain drive on 1/3, 1/2HP
models
- #41 roller chain drive on 3/4 HP models
- Trolley track for doors up to 12' high
standard
- Approximate shipping weight 80 lbs.
- Baked on dark grey coat finish
- Full feature logic control board
(Optional)
|
|
Back to top
|
Pro-LT
Commercial Limited Duty Trolley Operator.
The PRO-LT is designed
for use on commercial standard lift doors with standard lift tracks that
require no more than 15 cycles per hour.
|

|
Standard Features:
- 2 year warranty
- 1/2 HP high starting torque motor with
overload protection.
- Heavy duty 4L V-belt
- #41 Roller chain on internal drives
- 3/4" ball bearings on pulley shaft
- 24 V fused control circuit
- B-2 wiring standard. Safety equipment must
be installed when B-2 wiring is used.
- External radio control terminal strip.
- Three Button Control Station.
Fully adjustable rotary limit switches.
|
- Powder metal limit cams.
- Adjustable friction clutch.
- Emergency quick release disconnect for
manual operation.
- #48 roller chain drive.
- Trolley track for doors up the 12' high
standard.
- Baked on dark grey coat finish.
- Approximate shipping weight 60 lbs.
- Control logic circuit board c/w load
sensing feature (optional)
|
Back to top
Eagle Series
Quality, dependability, safety & security, Adding Value to Any Home. |
 |
 |
Model
500 - 15 Year Warranty
500 N Pull force - chain or belt. |
Model
700 - Lifetime Ltd. Warranty
700 N Pull force - chain or belt. |
|
European Engineered and
North American Manufactured, the Upwardor EAGLE SERIES of residential garage
door operators is designed to perform and built-to-last, guaranteeing years
of smooth, safe, quiet and trouble-free operation. |
DIRECT CURRENT (DC) "SMART"
MOTOR
- Power. Unit will open and close any single
car or double car garage door.
- Ultra quiet. Perfect for those with
above-garage living space.
- Smooth/ consistent operation.
- Low energy consumption.
- Maintenance free. No lubrication required.
- Aesthetically pleasing design and distinct
style.
- Convenient 4-minute light delay.
Illuminates even the darkest of garages. (bulb not included).
- Fast, easy and effortless installation,
completely assembled from factory.
|
ONE-PIECE BELT OR CHAIN RAIL
SYSTEM
- Belt or chain option may be used with
either the Model 500 or Model 700. (interchangeable).
- Fully assembled one-piece rails are
stronger, no weak link like most "retail" units.
- Belt or chain options can operate 7'
(2134mm), 8' (2438mm) or 10' (3048mm) high doors, (12' belt available).
- Belt rail: Elastomer belt with steel
reinforcement for the strongest and quietest operation possible.
- Chain rail: Strong and quiet at an
economical price.
- Minimal amount of headroom required - only
1/2" (13mm) above standard headroom requirements. (Other brands require 2"
(51mm) or more extra headroom.
|
Back to top
|